Subcategories
-
- -20%
3M 5313 Scotch-Weld Preformed Sealant Strip , Black, roll 2 mm x 7 mm x 15 m - 15 rolls pack
€546.21 €682.76
-20%3M 5313 Scotch-Weld Preformed Sealant Strip is a tacky solid extrusion based on a synthetic rubber. The adhesive strength of 5313 is sufficient to cause cohesive failure of the sealer before loss of adhesion to the substrate, when pulled in tension.
Price referred to a pack of 15 rolls 2mm x 7 mm x 15 m
-
- -20%
3M 847 Nitrile High Performance Rubber and Gasket Adhesive, 20 liters can
€542.45 €678.06
-20%3M 847 Nitrile High Performance Rubber and Gasket Adhesive is commonly used for bonding most rubber and gasket materials. High performance adhesive, offers resistance to heat and moisture, performing in temperatures up to 148°C/300°F.
Minimum order: pack of 1 can of 20 liters - delivery in 30/40 working days from date of order
-
Pneumatic Dispenser COX VBA 400A MR for two component adhesives in 400 ml cartridges with high viscosity
€661.00Pneumatic compressed air Dispenser COX VBA 400B MR for two component adhesives in 400 ml cartridges with 1:1 2:1 4:1 10:1 mix ratio.
Maximum Thrust: 5.5 kN Maximum Pneumatic Pressure: 6.8bar / 100psi
Allows the dispense of two-component cartridges with different mixing ratios with medium high viscosity.
Aluminum plates easy to replace to vary the mixing ratio. Aluminum plates easy to replace to change the mixing ratio.
Available in 7/10 working days from order date
-
- -10%
3M Super 77 Multipurpose Spray Adhesive, 20 l
€587.25 €652.50
-10%3M Super 77 Multipurpose Spray Adhesive is an extremely versatile, fast-drying, and transparent spray adhesive that bonds a wide range of lightweight materials. The spray formula is easy to dispense and apply directly onto surfaces and materials where needed.
-
- -30%
3M™ Scotch-Weld™ EPX™ Applicator, for 490 ml cartridges
€450.25 €643.21
-30%Manual applicator for dispensing EPX duo-pack adhesives in 490 ml cartridges 1:1, 2:1 10:1
Available in 30 working days from order date.
-
- -25%
3M™ Scotch-Weld™ EPX™ Manual Dispenser, for two-part 400 ml cartridges 1:1 2:1 ratio.
€482.41 €643.21
-25%New 3M™ Scotch-Weld™ EPX™ Manual Dispenser Applicator, for series EPX DP two-part 400 ml cartridges 1:1 2:1 ratio.
Available in 30 working days from order date.
-
-
Tensorgrip L31 Mist/Pebble Fine Spray Adhesive, 22 l
€617.65Tensorgrip® L31 is suitable for bonding HPL and paperback veneers to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. It is designed for permanent bonding of materials where immediate bond strength and high heat resistance are required. The L31 can also be used for bonding sheet metals where surface preparation is very important; the surface must be degreased and lightly abraded with fine abrasive or non-woven material.
To be used with specific accessories
-
- -25%
3M P591 All Purpose Sealant Primer, black, 250 ml - 12 bottles pack
€436.41 €581.88
-25%3M All Purpose Sealant Primer P591 is a black, one-part. formulation that helps to improve adhesion of polyurethane and hybrid adhesive sealants. This versatile black primer is an Isocyanate. Bottle 250 ml. Price referred to a pack of 12 bottles of 250 ml.
Only on request - available in 30 working days from order date
-
- -25%
3M™ PCA 7555 Screen Printable Adhesive - 5 l can
€430.76 €574.35
-25%3M™ PCA 7555 is a 5l UV-drying, screen printable adhesive.
100% solid adhesive
-
- -20%
3M JM 3748V0 Q Thermofuse adhesive for polyethylene and polypropylene cardboard 5 kg - 15 mm x 200 mm
€454.90 €568.62
-20%Hot melt adhesive 3M Jet Melt 3748V0 Q for polyethylene and polypropylene, good encapsulating properties, sealants and thermal resistance, Adhesive according to UL94-V0 Self-extinguishing - package of 5 kg. Size of candles version 3M Q only of 3M Diam.15,87 mm. x length 203 mm.
Attention Q version to be used only with 3M Jet melt applicator Q delivery in 30/40 working days date order
-
Tensorgrip L17 Hi-Temp contact spray adhesive, high-performance, 120°C, 22 l
€524.99TensorGrip® L17 is a high-performance contact adhesive. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.
Open time up to 40 mins, dries in 1-2 mins (dependant on temp & humidity). Clear.
IMO-MED Approved
To be used with specific accessories