Subcategories
Active filters
- Brand: 3M
-
- -16%
3M Spray Mount Adhesive 400 ml
€17.87 €21.27
-16%Spray Mount Adhesive is a repositionable spray adhesive, excellent for layouts, posters, presentations, graphic designs, and more.
Light spray allows repositioning, while a heavier spray allows a stronger bond. Quick tack, non-wrinkling, and resists bleed-through.
-
- -22%
3M Scotch-Weld EPX Mixing Nozzle, Green, 1:1 and 2:1, 48.5 ml and 50 ml
€0.98 €1.26
-22%3M™ Scotch-Weld EPX Mixing Nozzles, Square Green - T - 1:1 and 2:1, 48.5 ml and 50 ml - screw coupler.
-
3M DP410 Scotch-Weld Epoxy Adhesive, cartdrige 50 ml
€35.503M dp410 Scotch-Weld Epoxy Adhesive is a two-part structural adhesive. It is designed for use where toughness, high strength and rapid cure are required. It is fast setting and a high performance adhesive. It is tough with excellent durability.off-white in cartridge 50 ml.
-
- -20%
3M DP410 Scotch-Weld EPX Epoxy Adhesive 400 ml
€113.59 €141.99
-20%3M™ Scotch-Weld™ Epoxy Adhesive DP410 is a high performance adhesive on metals. Off-white two-part epoxy adhesive with 2:1 mix ratio.
The 400 ml cartridge has to be used with the 3M "J" mixing nozle and the pneumatic Manual Applicator for 400ml cartridges (sold separately).
-
- -25%
3M™ Hot Melt Applicator quadrack TC/TC-QLT, 220V - temperature 195¬∞C
€126.98 €169.30
-25%3M™ Hot Melt Applicator for low temperature hot melt adhesives, hot melt glue compatible with format 3M™ Quadrack - diameter 15,87 mm x 203 mm.(5/8"X 8"). 220 volt.
Temperature up to 195°C
Available in 20 working days
-
- -25%
3M™ Hot Melt Applicator LT quadrack TC/TC-QLT, 220V - low temperature 130°C
€154.14 €205.52
-25%3M™ Hot Melt Applicator for low temperature hot melt adhesives, hot melt glue compatible with format 3M™ Quadrack - diameter 15,87 mm x 203 mm.(5/8"X 8"). 220 volt.
Version dedicated to polystyrene 130°C (LT low temperature)
Available in 20 working days
-
- -30%
3M™ Scotch-Weld EPX Pneumatic Applicator, O, for 490 ml ratio 10:1 Duo-Pak Cartridges
€754.01 €1,077.16
-30%3M™ Scotch-Weld EPX Pneumatic Applicator for 490 ml ratio 10:1, Epx DP88xx - DP84xx- DP80xx
It does not work with 400 ml cartridges 1:1 2:1.
Available in 15/20 working days from order date.
-
- -30%
3M™ Scotch-Weld™ EPX™ Applicator, for 490 ml cartridges
€450.25 €643.21
-30%Manual applicator for dispensing EPX duo-pack adhesives in 490 ml cartridges 1:1, 2:1 10:1
Available in 30 working days from order date.
-
- -25%
3M™ Scotch-Weld™ EPX™ Manual Dispenser, for two-part 400 ml cartridges 1:1 2:1 ratio.
€482.41 €643.21
-25%New 3M™ Scotch-Weld™ EPX™ Manual Dispenser Applicator, for series EPX DP two-part 400 ml cartridges 1:1 2:1 ratio.
Available in 30 working days from order date.
-
3M™ DP8005 Scotch-Weld Structural Plastic Adhesive, traslucent, 45 ml cartridge
€49.173M™ DP8005 Scotch-Weld Structural Plastic Adhesive is specially formulated to bond many low surface energy plastics. It will adhere many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.
10:1 ratio, two-part acrylic based adhesive.
Storage at a maximum temperature of 4°C
-
- -24%
3M™ DP8005 Scotch-Weld Structural Plastic Adhesive, Beige, 490 ml cartridge
€231.75 €304.93
-24%3M™ DP8005 Scotch-Weld Structural Plastic Adhesive is specially formulated to bond many low surface energy plastics. It will adhere many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.
10:1 ratio, two-part acrylic based adhesive.
-
- -28%
3M™ Scotch-Weld EPX Pneumatic Applicator for 400 ml ratio 1:1 2:1 Duo-Pak Cartridges
€775.56 €1,077.16
-28%3M™ Scotch-Weld EPX Pneumatic Applicator for 400 ml ratio 1:1 2:1 Duo-Pak Cartridges
Available in 10 working days from order