Structural adhesives

3M DP620NS is a a flexible, two-part polyurethane based structural adhesive that performs well in numerous applications where some flexibility is needed. It effectively bonds to many substrates such as composites, metals, wood, and many plastics and rubbers, ceramics and glass (may require primer for durability).

3M DP270 Epoxy Adhesive two-part, black. 1:1 mix ratio, 70 minutes worklife and  handling strenght in approximately 3 hours. It is non-corrosive to copper, rigid potting compound. DP270 protects heat-sensitive components, flammability testing per UL94 HB.

New 48.5 ml cartridge, to be used with 3M T mixing nozzle, sold separately.

Available in 30 working days from order date

Transparent version available

3M DP760 is a two-part epoxy adhesive, it has a non-sag formulation that ensures the adhesive stays where applied. High temperature resistance up to 230°C, open time of 45 to 60 minutes, reaches handling strength in 4 to 6 hours. 50 ml cartridge, to be used with 3M T green mixing nozzle.

3M Scotch-Weld Structural Epoxy Adhesive EC-9323 B/A is a two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP.

Kit 1 litre, Red/orange.

Please contact us before ordering to check the availability - delivery in 20/40 working days from order date.

Requires ADR transport

3M dp410 Scotch-Weld Epoxy Adhesive is a two-part structural adhesive. It is designed for use where toughness, high strength and rapid cure are required. It is fast setting and a high performance adhesive. It is tough with excellent durability.off-white in cartridge 50 ml.

3M DP8010 Scotch-Weld is a structural adhesive for low surface energy plastics. New 45 ml cartridge, blue.

10:1 mix, 10 minute work life, and handling strength in 2 hours. 

To be used with 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. (3M P mixing nozzle and 3M 10:1 plunger)

Dual Drive Manual Applicators are used to dispense two-component Structural Adhesives packaged in Duo-Pak (DP) cartridges. Compatible with 3M - Loxeal - Araldite - Henkel two-part adhesives with mix ratio 1:1 / 2:1 /10:1 in 50 ml , 48,5 ml, 45 ml, 38 ml cartiridges

3M DP100 is a Duo-Pack clear Epoxy Adhesive, fast setting, rigid and dries at room temperature. It has low viscosity, it's easy to apply, transparent. New 48,5 ml cartridge, to be used with 3M T type green mixing nozzle.

Available in Stock

3M™ DP8005 Scotch-Weld Structural Plastic Adhesive is specially formulated to bond many low surface energy plastics. It will adhere many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.

10:1 ratio, two-part acrylic based adhesive.

Storage at a maximum temperature of 4°C

3M™ DP8005 Scotch-Weld Structural Plastic Adhesive is specially formulated to bond many low surface energy plastics. It will adhere many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.

10:1 ratio, two-part acrylic based adhesive.

3M Scotch-Weld Epoxy Adhesive DP460 Off-White is a two component, room temperature curing, epoxy based resin that offers high durability, shear strength, and peel strength. 2:1 mix ratio by volume. 50 mL Duo-Pak Cartridge.

Only on request, please contact us for stock availability. 

3M DP8407NS Scotch-Weld Metal Bonder Acrylic Adhesive is a gray structural adhesive that bonds to a variety of materials (especially bare metals such as aluminum, cold rolled steel, copper, brass and bronze) while resisting corrosion. Mix ratio 10:1.

45 ml cartridge, to be used with 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

This product is subject to stock availability - please contact us before ordering