Tesa 60022 Spray Glue EXTRA STRONG, 500 ml

TESA® Professional 60022 Extra Strong Spray Adhesive for Permanent Bonding

tesa® Professional 60022 Spray Glue Extra Strong is a solvent-based, film-forming spray adhesive designed for powerful and permanent bonding of a wide range of materials. It is particularly suitable for light and heavy materials, including applications where conventional spray adhesives may not provide sufficient adhesion.

The adhesive can be used on smooth, rough and uneven surfaces and is suitable for bonding materials such as fabric, plastic, cardboard, foam rubber, insulating materials, vinyl, leather, synthetic leather and rubber to each other or to substrates such as wood and metal. Its adjustable spray nozzle allows the adhesive quantity and spray direction to be adapted to the application.

Which materials can tesa 60022 bond?

Tesa 60022 is designed for versatile permanent bonding of demanding materials used in industrial, automotive, upholstery, furniture and craft applications.

Before use, it is always advisable to verify the suitability of the adhesive for the specific materials and the combination of surfaces to be bonded.

Key Industrial Performance Advantages

• Extra-strong permanent adhesion for demanding bonding applications.
• Suitable for heavy materials as well as lighter materials.
• Suitable for rough and uneven surfaces.
• Film-forming spray adhesive for broad and versatile bonding applications.
• Adjustable spray quantity with High, Medium and Low settings.
• Adjustable spray direction for horizontal or vertical application.
• High adhesive strength for permanent bonding.
• Temperature resistant from -30 °C to +80 °C
• Humidity resistant and waterproof.
• UV resistant.
• Chemical resistant.
• Silicone-free formulation.

The technical values stated by tesa are average values and should be considered representative rather than specification values. Actual performance depends on the materials, surface condition, application method and environmental conditions.

Professional Applications for tesa 60022

Automotive and vehicle interiors

tesa 60022 is particularly suitable for automotive applications involving fabrics, foam materials, vinyl, leather, synthetic leather and other interior materials. Its ability to bond demanding materials and its resistance to humidity and temperature make it suitable for a range of professional vehicle-interior bonding applications.

Upholstery and furniture

The extra-strong spray adhesive is suitable for upholsterers working with fabrics, foam rubber, leather, synthetic leather and other covering materials. The spray format allows adhesive to be distributed over larger areas where a uniform application is required.

Textiles and coverings

tesa 60022 can be used for permanent bonding of fabrics and textile materials to suitable substrates. It is useful for applications where a strong adhesive bond is required across a relatively large surface area.

Foam and insulating materials

The adhesive is suitable for bonding foam rubber, foam materials and insulating materials in applications where permanent adhesion is required. The adjustable spray quantity can help adapt the application to different surface conditions.

Industrial assembly and maintenance

For professional assembly and maintenance, tesa 60022 provides a practical aerosol format for permanent bonding of suitable materials to wood, metal, plastic and other substrates. It can be particularly useful when working with irregular or difficult-to-bond surfaces.

Saddlery and leather applications

tesa identifies saddleries and professional leather applications among the typical fields of use for tesa 60022. The adhesive can be used for suitable combinations of leather, synthetic leather, fabric, foam and other materials.

Adjustable Spray Application

One of the practical advantages of tesa 60022 is its adjustable spray nozzle. The spray quantity can be selected between High (H), Medium (M) and Low (L), allowing the amount of adhesive to be adapted to the application and surface.

The spray direction can also be adjusted between horizontal and vertical. This makes the aerosol format suitable for different working positions and surface geometries.

tesa specifies a recommended spraying distance of approximately 30 cm.

How to Use tesa 60022 Spray Adhesive

1. Prepare the surfaces: surfaces to be bonded should be dry and free from dust, grease and other contaminants.
2. Test the materials: for new or critical applications, test the adhesive on a sample before starting production work.
3. Shake the can well: shake the aerosol before application and make sure the spray nozzle is free from dried adhesive.
4. Adjust the spray: select the appropriate spray quantity and horizontal or vertical spray direction.
5. Apply from approximately 30 cm: spray the adhesive evenly onto the surface while maintaining the recommended distance.
6. Allow the adhesive to develop its bond: follow the product-specific application instructions and ensure that the two surfaces are correctly positioned and pressed together.
7. Clean the nozzle after use: turn the can upside down after application and spray until only propellant is released. This helps prevent adhesive from drying inside the nozzle.

For production or safety-critical applications, always consult the latest technical documentation and safety data sheet and verify compatibility with the actual materials being bonded.

Why Choose tesa 60022 for Heavy Materials?

tesa 60022 is designed for applications where a conventional light-duty spray adhesive may not be sufficient. Its combination of high adhesion, permanent bonding performance and suitability for heavy materials makes it appropriate for demanding professional applications.

It is particularly useful when the materials have rough or uneven surfaces, when a large bonding area needs to be covered, or when materials such as fabric, foam, rubber, leather or plastic need to be bonded to wood or metal.

The adjustable spray quantity also provides greater control over adhesive application compared with a fixed-output aerosol, helping users adapt the amount of adhesive to different materials and surface conditions.

Technical Specifications

Frequently Asked Questions About tesa 60022

What is tesa 60022 used for?

tesa 60022 is an extra-strong spray adhesive for permanent bonding of a wide range of materials. It is particularly suitable for fabric, plastic, cardboard, foam rubber, insulation materials, vinyl, leather, synthetic leather and rubber, including bonding these materials to wood or metal.

Is tesa 60022 suitable for heavy materials?

Yes. tesa 60022 is specifically designed for permanent bonding of heavy materials as well as lighter materials. It is also suitable for rough and uneven surfaces.

Can tesa 60022 be used for fabric and textiles?

Yes. Fabric and textiles are among the materials specified by tesa for use with 60022. It is commonly used for professional upholstery, covering and interior applications.

Is tesa 60022 suitable for foam rubber?

Yes. Foam rubber and other foam materials are among the intended applications for tesa 60022, including upholstery and other professional bonding applications.

Can tesa 60022 bond materials to metal?

Yes. tesa specifies that the adhesive can bond suitable materials such as fabric, plastic, foam, leather and rubber to metal as well as wood. Compatibility should be tested on the specific material combination before production use.

Can tesa 60022 bond materials to wood?

Yes. tesa 60022 can be used for bonding suitable materials to wood substrates. The manufacturer also lists wood among the suitable surfaces and materials for the product.

Is tesa 60022 suitable for automotive applications?

Yes. tesa specifically identifies automotive applications as a suitable field of use for 60022, particularly for demanding materials such as foam and fabric.

Is tesa 60022 waterproof?

Yes. According to the manufacturer's technical information, tesa 60022 is waterproof and resistant to humidity.

What temperature can tesa 60022 withstand?

The specified temperature resistance is from -30 °C to +80 °C.

Is tesa 60022 UV resistant?

Yes. tesa specifies UV resistance for the product.

Is tesa 60022 chemical resistant?

Yes. Chemical resistance is listed among the product's performance properties. The suitability of the adhesive should nevertheless be verified for the specific chemical environment and application.

Is tesa 60022 silicone-free?

Yes. tesa 60022 is specified as silicone-free.

Is tesa 60022 solvent-free?

No. tesa specifies that the product is not solvent-free. The product should therefore be handled and used in accordance with the manufacturer's safety instructions and current Safety Data Sheet.

How far should tesa 60022 be sprayed from the surface?

tesa specifies a recommended spraying distance of approximately 30 cm.

Can the spray quantity of tesa 60022 be adjusted?

Yes. The nozzle provides three spray-quantity settings: High, Medium and Low. The spray direction can also be adjusted between horizontal and vertical.

Is tesa 60022 suitable for rough or uneven surfaces?

Yes. The product is specifically designed for applications involving rough and uneven surfaces and heavy materials.

How should tesa 60022 be stored and handled?

Because tesa 60022 is an aerosol adhesive classified by the manufacturer as hazardous material and is not solvent-free, it should be handled and stored according to the instructions on the can and the current Safety Data Sheet. Keep it away from ignition sources and heat and follow all applicable workplace safety requirements.