3M™ 583 Thermal Bonding Film it’s a nitrile phenolic based thermosetting adhesive film that can be heat or solvent activated, or lightly crosslinked using a post heat exposure. It provides a strong, permanent bond to a variety of surfaces. This product must be stored at temperature not lower than 4 ºC (40 ºF).
semi clear
3M™ 583 Thermal Bonding Film, 50 mm x 55 m x 0,05 mm
This product has a minimum quantity of 5 and sold by 5
€68.90
3M™ 583 Thermal Bonding Film it’s a nitrile phenolic based thermosetting adhesive film that can be heat or solvent activated, or lightly crosslinked using a post heat exposure. It provides a strong, permanent bond to a variety of surfaces. This product must be stored at temperature not lower than 4 ºC (40 ºF).
semi clear
Shipping Exworks. To arrange transportation, check the technical documents of the product
100% secure payments 
3M™ 583 Thermal Bonding Film, 50 mm x 55 m x 0,05 mm
3M™ 583 Thermal Bonding Film it’s a nitrile phenolic based thermosetting adhesive film that can be heat or solvent activated, or lightly crosslinked using a post heat exposure. It provides a strong, permanent bond to a variety of surfaces. This product must be stored at temperature not lower than 4 ºC (40 ºF).
If crosslinked the product will provide additional heat and solvent resistance as well as slightly higher cutting forces.
3M™ 583 is ideal for low temperature bonding applications, such as bonding flex antenna and metal face plates to a chassis, or splicing glass fabric in PCB board manufacturing. It can be die-cut and gives a slight surface tack. It works highly effectively on a variety of substrates.
Suggested Applications
- Bond flex antenna and metal face plates to the chassis
- Use to splice glass fabric in PCB board manufacturing
- Flex Bonding
- Glass Cloth Splicing for PCB
Data sheet
- Brand
- 3M
- Format (width x length)
- 50 mm x 55 m
- Thickness
- 0,05 mm
- Colour
- semi clear
- Type of price
- one roll
- Status
- B