Kisling ERGO 1675 two-part methacrylate adhesive, black, 50 ml cartiridge, 10:1 ratio

Kisling ERGO 1675 two-part methacrylate adhesive, black, 50 ml cartiridge, 10:1 ratio

Kisling ERGO 1675 is a nearly odourless, non-sagging, two-part methacrylate adhesive. The cured adhesive offers a balanced profile of properties with high

stiffness combined with a strong toughness. Designed for structural bonding

of thermoplastic, metal, and composite assemblies.

50 ml Cartridge, with 10:1 ratio - To extrude it needs the mixer nozzle and Kisling manual applicator sold seperately. Dedicated mixer nozzle 10:1 ratio type 3M small orange.

Advantages

• Good adhesion to a wide range of materials
• Non-dropping paste
• Bridges gap up to 10 mm
• Minimum gap 75 µm (Spacer)
• Optically visible hardening process – colour changes from blue to green
• Excellent resistance against dynamic loads
• Resistant against outside conditions and humidity
• 100% reactive compound
• Low odour
• High flashpoint

Specifications

• Product categoryMethacrylate structural adhesives
• Colorgreen (after cure)
• Mixing ratio10:1 (V:V)
• Viscosity [mPas]~100 000 thixotropic (Mix)
• Pot life [min]2 – 3
• Fixture time [min]4 – 5
• Final strength [h]~12
• Tensile strength [N/mm2]~17
• Tensile shear strength [N/mm2]~21
• Tensile shear strength [N/mm2]~22
• Elongation at break [%] 85
• Temperature range [°C]-50 – +120