Special / Heat Activated Tapes

Available only on request

3M™ 361 Glass Cloth Tape has a pressure sensitive silicone adhesive, designed for applications requiring high adhesion, long ageing, good holding power and clean removal. 

Protect surfaces and materials from intermittent temperatures up to 288 °C, can be certified to meet F.A.R. 25.853, flame resistant specification.

3M™ 394 Vent Tape, non-woven synthetic backing with high air/gas permeability, good burst strength and solids barrier for minimal voids and less clean up.

Commonly used for outgas venting in appliance manufacturing, meets most outgassing requirements for foam-in-place insulation processes.

Available in a pack of 36 rolls in 10 working days from the date of order

Available only on request; delivery time 30-40 working days from order date

3M 398FR is a flame retardant certified fiberglass adhesive tape. The backing offers abrasion and puncture resistance for long-term aging performance in aerospace applications; acrylic adhesive offers excellent long lasting properties ideal for many permanent applications.

Meets flame retardant specifications of FAR 25.853 (a) and FAR 25.855 (d) and complies with the EU

Available only on request; delivery time 30-40 working days from order date

3M 398Fr is a flame retardant certified fiberglass adhesive tape. The backing offers abrasion and puncture resistance for long-term aging performance in aerospace applications; acrylic adhesive offers excellent long lasting properties ideal for many permanent applications.

Meets flame retardant specifications of FAR 25.853 (a) and FAR 25.855 (d) and complies with the EU

The 3M Riveters 685 Tape transparent film has a green polyester film adhesive and a rubber-strip coating along the edges of the tape. The transparent, tack-free center window also improves visibility and accuracy during the riveting process.Discontinued - not available for order. Please, contact us for more information

Please, contact us for more information

3M 695 Riveters Tape has a polyethylene film backing and an acrylic adhesive coating along both edges of the tape. The transparent, yellow, tack-free center window improves visibility during the riveting process.

3M 855 High Temperature Nylon Film Tape is a masking tape with a non-silicone rubber adhesive designed to be cleanly removed after short high temperature bake cycles 204 ° C (400 ° F). Tough nylon backing adds temperature resistance.

Elongation properties make for effective masking and faster removal.

Product only on request - delivery in 20/30 working days from order date - minimum orderable 24 rolls

This tape is designed to help reduce noise, vibration, squeaking and noises in automotive interior applications, the non-woven micro fibre backing provides conformability, elasticity, compressibility and durability; being durable and abrasion resistant it maintains a long wear life, is die-cut and passes FMVSS 302.

Withstands a temperature range from -30 ° F / -34 ° C to 250 ° F / 121 ° C.

3M™ Diamond Grade™ Conspicuity Vehicle Marking 983-10, white retroreflective marking tape, with ES Edge Sealed. It is designed for application to rigid sided vehicles for increased visibility. 

with ECE 104 mark

3M™ 3294 Venting Tape is strip-coated so uncoated areas have higher permeability to help minimize foaming voids. With a non-woven conformable backing that has high air/gas permeability.

Meets most outgassing requirements for foam-in-place insulation processes.

Product only on request. Delivery in 30 working days from order date - minimum orderable a pack of 24 rolls 51 mm x 33 m.

Available only on request

3M™ 361 Glass Cloth Tape has a pressure sensitive silicone adhesive, designed for applications requiring high adhesion, long ageing, good holding power and clean removal. 

Protect surfaces and materials from intermittent temperatures up to 288 °C, can be certified to meet F.A.R. 25.853, flame resistant specification.

Available only on request

3M™ 361 Glass Cloth Tape has a pressure sensitive silicone adhesive, designed for applications requiring high adhesion, long ageing, good holding power and clean removal. 

Protect surfaces and materials from intermittent temperatures up to 288 °C, can be certified to meet F.A.R. 25.853, flame resistant specification.