Error!

Tensorgrip L22 DCM Free Fine Web Spray Adhesive, 22 l

0 Review(s) 
€724.81
VAT excluded reverse charge

Availability: check_circle_outline Available unless sold

Quantity
Shipping Exworks. To arrange transportation, check the technical documents of the product.


Tensorgrip® L22 is a fine spray adhesive for the permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

Open Time Up to 30mins, clear.

To be used with specific accessories

Tensorgrip® L22 is a fine spray adhesive for the permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

Open Time Up to 30mins

Advantages

  • Fast Drying;
  • Low V.O.C.;
  • Good Heat Resistance 115°C;
  • Very High Solids;
  • Non-Chlorinated Formulation;
  • Great compatibility with Low surface energy materials.

Developed For

  • Aluminum
  • Standard Laminate
  • Synthetic Leather

Directions for use:

Make sure that surfaces are clean, dry and free from dirt. Shake well and then spray about 10-20 cm (4” – 8”) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. Spray both surfaces vertically and horizontally.

Allow 2 - 3 minutes for the adhesive to tack off then adhere surfaces and press together with adequate pressure 

Allow 24 hours for the adhesive to fully cure.

For best results, the temperature of the adhesive and the surfaces being bonded should be between 16°C-27°C (60°F-80°F). Use with adequate ventilation.

If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. 

For more detailed application instructions, see the product data sheet in the technical documents.

FLC-L22
50 Items

Data sheet

Brand TensorGrip - Quin Global
Format 22 l
Colour Clear
Units per package 1
Type of price one canister
Status A
  • Status A: Ready subject to prior sale
  • Status B: Available in 30 days
  • Status C: Available in 60 days

Download


Tensorgrip - Joinery

Tensorgrip - Joinery Brochure (eng)

cloud_download Download (3.53M)

Scheda di sicurezza L22

Scheda di sicurezza Tensorgrip L22 (ita)

cloud_download Download (249.62k)

Safety Data Sheet L22

Safety Data Sheet Tensorgrip L22 (eng)

cloud_download Download (268.41k)

Technical Data L22 500ml

Technical Data tensorgrip L22 500ml (eng)

cloud_download Download (663.31k)

Reviews

No customer reviews for the moment.

Write your review

Tensorgrip L22 DCM Free Fine Web Spray Adhesive, 22 l

Tensorgrip® L22 is a fine spray adhesive for the permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

Open Time Up to 30mins, clear.

To be used with specific accessories

Write your review