Tensorgrip L27 Universal Spray Contact Adhesive, 22 l

TensorGrip® L27 is a high-performance contact adhesive, its resin formula creates a tough and resilient bond line between decorative surface materials and common wood substrates. Suitable for bonding HPL, GRP, aluminium, worktop edging, foam, fabric, carpet, cork & ridged plastics.

NOT RECOMMENDED for use with plasticised PVCs / vinyl’s, flexible plastics, PP, PE polystyrene (EPS).

Open Time Up to 30 mins

Advantages

• High Solids.
• Easy Application Control.
• Versatile.
• Economic.

Developed For

• Concrete
• FRL
• Plywood
• Standard Laminate
• Wood Buildups

Directions for use:

Make sure that surfaces are clean, dry and free from dirt. Shake well and then spray about 10-20 cm (4” – 8”) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. Spray both surfaces vertically and horizontally.

Allow 2 - 3 minutes for the adhesive to tack off then adhere surfaces and press together with adequate pressure 

Allow 24 hours for the adhesive to fully cure.

For best results, the temperature of the adhesive and the surfaces being bonded should be between 16°C-27°C (60°F-80°F). Use with adequate ventilation.

If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. 

For more detailed application instructions, see the product data sheet in the technical documents.