Saint-Gobain / Norton V2100 Thermalbond Duoble Sided Tape, 6 mm x 15 m, thickness 6.4 mm

Saint-Gobain / Norton V2100 Thermalbond Duoble Sided Tape, 6 mm x 15 m, thickness 6.4 mm

The Thermalbond® V2100 is a high-strength, polyurethane foam spacer with a high performance pressure sensitive adhesive. 

This high density tape has a specially formulated open-cell structure and is used as spacer for two- and four- sided structural glazing systems.

The V2100 tape has proven to be compatible with all commercially available silicone sealants used for structural work with glass. It has a shear strength on both sides and a semi-rigid open cell structure that maintains the necessary space to allow air and moisture to reach the silicone to optimize its vulcanization. 

Its low conductivity reduces heat transfer and inhibits condensation on metal doors, windows and systems. The V2100 tape is designed as a spacer for glass, metal, stone, mineral concrete and plastic panels in structural silicone glazing systems, including two- and four-sided building silicone glazing of curtain walls, showcases, skylights and windows; to temporarily attach panels or glasses to the frame in workshop productions of structural silicone glass systems and coatings; to temporarily fix light decorations to the substrate while permanent structural silicone adhesives are vulcanizing; as a thermal insulator to reduce heat conduction. 

Important Instructions

Refer to silicone manufacturer to confirm compatability information. Due to the numerous variables involved in a structural glazing system, each project should be individually lab tested by the silicone manufacturer for compatability between Thermalbond, the structural silicone and all other adjacent components.

Surfaces must be clean and free of oil, grease, moisture, dust and dirt. Isopropyl alcohol is good for cleaning the surface. Apply a uniform pressure of 15 psi (103 kPa) to promote good contact between the material to be bonded and the tape.

The application temperature should be between 60°F and 125°F (16°C to 52°C). It is not recommended to apply these tapes at temperatures below 60°F (16°C), as the adhesive does not flow in this condition and can result in poor bonding. Recommended service temperature is between -40°F to 180°F (-40°C to 82°C).

Shelf Life 12 months after the date of sale when stored in original packaging at temperatures up to 70°F (21°C) and 50% relative humidity