- -€3.54
3M™ DP8810NS is a low-odor, green, two-component, toughened, non-sagging acrylic adhesive with a working open time of 10 minutes and structural strength after approximately 20 minutes.
The mixing ratio is 10:1, 45ml cartridge for use with the 3M P-Series mixing tip and the dedicated 3M plunger with a 10:1 ratio.
Available in stock
3M™ DP8810NS Scotch-Weld Low Odor Acrylic Adhesive 45 ml
€18.14
3M™ DP8810NS is a low-odor, green, two-component, toughened, non-sagging acrylic adhesive with a working open time of 10 minutes and structural strength after approximately 20 minutes.
The mixing ratio is 10:1, 45ml cartridge for use with the 3M P-Series mixing tip and the dedicated 3M plunger with a 10:1 ratio.
Available in stock
Shipping Exworks. To arrange transportation, check the technical documents of the product
100% secure payments 
3M™ Scotch-Weld™ DP8810NS is a high-performance two-component structural acrylic adhesive engineered for industrial bonding of plastics, metals, and composite materials.
This green, single-sided structural adhesive offers a powerful combination of mechanical strength, impact resistance, and durability, even under demanding loads and environmental conditions.
DP8810NS is designed to support structural assemblies where polymers and metals must withstand stress, vibration, impact or thermal cycling making it an ideal solution for OEM production, manufacturing operations, and engineering applications.
Recommended for technical buyers in:
- Production lines
- Engineering and R&D departments
- Maintenance, Repair & Operations (MRO)
- Product design and prototyping teams
- Mechanical engineers and materials specialists
Ideal when you need:
- High structural performance beyond general-purpose adhesives
- Load-bearing joints with dynamic stress and vibration
- Reliable adhesion across plastics and metals
- Industrial-grade adhesive for automated and manual applications
- Replacements for rivets, welds or mechanical fasteners
Main features and industrial performance advantges
- Strong adhesion to a wide range of plastics and metals
- High structural strength for load-bearing joints
- Impact and fatigue resistance for long-term durability
- Controlled working time and fast fixture strength
- Non-sag formulation suitable for vertical and overhead surfaces
- Excellent resistance to moisture and environmental stress
- Translucent to green formulation, providing easier visual inspection during assembly
- It is not classified as flammable in liquid state, helping to create a safer working environment.
Technical specifications
| Property | Value |
| Technology | Structuraç acrylic, two-component adhesive |
| Mix ratio | 10:1 |
| Working time | 8 min - 12 min |
| Structural strenght | 20 min |
| Color | Green |
Material compatibility
3M™ DP8810NS adheres reliably to:
- Engineering plastics (ABS, PVC, PC)
- Metals (aluminum, stainless steel, coated metals)
- Composite materials and reinforced polymers
- Hybrid substrates requiring structural bonding
Surface preparation (e.g., cleaning, abrasion) is recommended for optimal strength.
Typical industrial applications and sectors of use
Automotive & Transportation
- Plastic to metal bonding in interior and exterior components
- Structural bonding of lightweight automotive assemblies
- Mounting clips, braces and engineered plastic parts
Industrial Machinery & Fabrication
- Structural frame components
- Mechanical housings and assemblies
- Industrial equipment bonding requiring fatigue resistance
Electronics & Enclosures
- Bonding of plastic housings to metal frames
- Structural support for industrial electronics cabinets
Consumer & Technical Products
- Durable components in sports equipment
- Structural plastic frameworks
- Engineered product enclosures
Renewable Energy & Aerospace
- Composite bonding in lightweight structures
- Secondary structural joints
- Load-resistant assemblies
Performance benefits for B2B buyers and engineering teams
- Engineered for structural bonding, not just general adhesion
- Fast fixturing for high-speed manufacturing
- Simplifies assemblies by reducing dependence on mechanical fasteners
- Consistent, repeatable performance in production environments
- Trusted performance from 3M for OEM and industrial applications
Ideal for manufacturers, engineers, maintenance teams and technical procurement (automotive, industrial equipment, electronics, fabrication and more).
Integration in Manufacturing Processes
3M™ DP8810NS is compatible with:
- Manual and pneumatic cartridge dispensing systems
- Automated assembly lines
- Static mixing nozzles for precise mixing
- Industrial bonding stations
Its working time supports alignment and adjustment before full cure.
Frequently Asked Questions (FAQ) (FAQ)
Q: Can it bond plastic to metal?
A: Yes, DP8810NS is formulated for structural bonds between engineering plastics (ABS, PVC, PC) and metals such as aluminum and stainless steel. It is less sensitive to surface cleaning and cures quickly.
Q: Is 3M™ DP8810NS better than an epoxy adhesive for bonding plastic to metal?
A: It depends on the application and the materials involved. In many plastic-to-metal applications, 3M™ DP8810NS can offer advantages over structural epoxy adhesives.
Q: Can 3M™ DP8810NS bond ABS without primer?
A: Yes, a primer is not required. The adhesive is formulated to bond well to various engineering plastics, including ABS, PVC, and polycarbonate. Final adhesion performance depends on surface cleanliness, the presence of release agents, the surface energy of the specific ABS grade, and environmental exposure requirements.
Customers who bought this product also bought:
- -€1.36
- -€8.36
- -€1.60
- -€5.33
- -€6.79
- -€3.23
- Out-of-Stock
Data sheet
- Brand
- 3M
- Format
- 45 ml
- Colour
- Green
- Units per package
- 12 cartridges
- EAN-Code
- 50076308984422
- Type of price
- per cartridge
- Status
- B