3M™ DP460 is a two-component epoxy adhesive formulated for high-strength, high-tenacity industrial applications.
- Mix ratio: 2:1
- Workability time: 60 minutes
- Handling time: approximately four hours.
Bonds to a variety of surfaces, including metals, ceramics, wood, and certain plastics.
Cartridge for use with the 1:1 and 2:1 mixing nozzles, 48.5 ml and 50 ml and the manual applicator for 50 ml two-component cartridges, sold separately.
Over 30 MPa per cm². Clean and brushed ALU/ALU.
3M DP460 Scotch-Weld Epoxy Adhesive OFF-white 50 ml.
€25.90
3M™ DP460 is a two-component epoxy adhesive formulated for high-strength, high-tenacity industrial applications.
- Mix ratio: 2:1
- Workability time: 60 minutes
- Handling time: approximately four hours.
Bonds to a variety of surfaces, including metals, ceramics, wood, and certain plastics.
Cartridge for use with the 1:1 and 2:1 mixing nozzles, 48.5 ml and 50 ml and the manual applicator for 50 ml two-component cartridges, sold separately.
Over 30 MPa per cm². Clean and brushed ALU/ALU.
Shipping Exworks. To arrange transportation, check the technical documents of the product
100% secure payments 
3M™ Scotch-Weld™ Epoxy Adhesive DP460 is a high-performance, two-component epoxy.
It is formulated for industrial applications requiring high mechanical strength, durability, and chemical and environmental resistance.
Its off-white, medium-to-high viscosity formulation provides a good balance of stiffness and toughness, ideal for bonding metals, composites, and rigid substrates.
DP460 is designed for manufacturing, assembly, and maintenance environments where dynamic stress, vibration, and thermal variations are present.
Recommended for:
- Structural metal assemblies such as stainless steel, aluminum (etched or sandblasted), cold-rolled steel, copper, and brass.
- Bonding composite materials such as fiberglass (GRP), ABS, polycarbonate, rigid PVC, and acrylic.
- Machinery frames where toughness and high strength are required
- Industrial equipment
- Automotive structural bonding
When to choose it
3M™ DP460 is ideal for OEMs, mechanical engineers, MRO personnel, and industrial procurement teams evaluating structural adhesive solutions for metals and composites.
It's ideal when you need:
- High static and dynamic load capacity
- Vibration and impact resistance
- Reliable long-term bonds in industrial environments
- A structural alternative to rivets, screws, and welds
Technical features and benefits for industrial applications
- High structural strength for mechanical and load-bearing joints
- Excellent impact and fatigue resistance
- Excellent chemical and environmental resistance
- Reliable adhesion to metals and composite materials
Technical specifications
| Property | Value |
| Technology | Two-component structural epoxy adhesive |
| Mixing ratio | 2:1 |
| Working time | 60 min |
| Handling time | ~4 hours |
| Full cure | 48 hours (at 22ºC / 72ºF) |
| Color | Off White |
Material Compatibility
3M™ DP460 adheres effectively to:
- Steel and stainless steel
- Aluminum and light alloys
- Rigid plastics (after surface preparation)
- Composites and engineering materials
- Engineering laminates
Surface preparation (cleaning, degreasing, abrasion) is recommended to maximize adhesive strength.
Typical Industrial Applications
Metal Fabrication and Assembly
- Structural bonding of steel and aluminum components
- Connection of load-bearing mechanical elements
- Brackets, brackets, supports, and metal casings
Composites and Engineering Materials
- Assembly of composite panels
- Bonding of reinforced materials for lightweight applications
- Structural solutions in machinery and equipment
Industrial Machinery and Plants
- Load-bearing structures in machinery
- Components subject to vibration and dynamic loads
- Complex engineering casings and supports
Automotive and Transportation
- Structural applications in vehicles
- Assembly of engineering supports and brackets
Domande frequenti (FAQ)
Q: What materials can I use it on?
A: 3M™ DP460 is suitable for bonding metals (aluminum, steel, copper, brass), ceramics, glass, concrete, wood, and some plastics. A small-scale test is always recommended to verify compatibility and adhesion.
Q: What applicators and mixers are recommended?
A: To use the product, you must use the 1:1 and 2:1 Mixing Nozzle, 48.5 ml and 50 ml, and the manual applicator for 50 ml two-component cartridges, which are sold separately.
Q: What is the difference between DP460 and DP490?
A: DP460 is formulated to provide balanced stiffness and impact resistance, with a white/opal finish. DP490 offers increased stiffness and fatigue resistance, optimized for heavy structural loads and high static stresses, and is black/anthracite in color.
Customers who bought this product also bought:
- -€3.23
Data sheet
- Brand
- 3M
- Format (width x length)
- 50 ml
- Colour
- Off White
- EAN-Code
- 04054596677838
- Type of price
- one cartridge
You might also like