Aerosol / Spray Adhesives

3M Industrial Cleaner is ideal for helping dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It's a citrus oil based cleaner and contains no petroleum distillates.

Use it to clean and degrease metal parts, motors, tools, printing presses, concrete, or almost any dirty or greasy surface.

Product on request. MOQ 12 (200 ml each)

TensorGrip® T18 is a mist spray adhesive designed for the purpose of bonging of fibrous matting. This hi-tac product with its immediate makes it the prefect product for temporary holds and fast application. TensorGrip® T18 is the perfect product for bond fibrous materials to metal and other materials with only a small amount of adhesive needed.

Open time 10 mins. Colour clear.

3M PhotoMount Spray Adhesive is ideal for mounting photographs, illustrations, prints, posters and maps.

High-strength, professional grade adhesive designed for coated papers, this spray adhesive gives an instant and ideal bond, dries flat with no warping.

TensorGrip® L27 is a high-performance contact adhesive, its resin formula creates a tough and resilient bond line between decorative surface materials and common wood substrates. Suitable for bonding HPL, GRP, aluminium, worktop edging, foam, fabric, carpet, cork & ridged plastics.

Open Time Up to 30 mins. clear.

tesa Spray Glue PERMANENT 60021 for light and medium heavy materials, with either smooth of textured surfaces - silicone free, 500 ml. Color: Transparent

Available on request in 15 working days from order date

3M DRY LAY-UP Quick-setting red universal spray adhesive, suitable for light materials and in particular for expanded polystyrene. 500 ml can.

Is designed to reduce the time required for the dry laying of fiberglass.

TensorGrip® L17 is a high-performance contact adhesive. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.

Open time up to 40 mins, dries in 1-2 mins (dependant on temp & humidity). High Temp Resistance - 120°C. Clear.

IMO-MED Approved

Spray Mount Adhesive  is a repositionable spray adhesive, excellent for layouts, posters, presentations, graphic designs, and more. 

Light spray allows repositioning, while a heavier spray allows a stronger bond. Quick tack, non-wrinkling, and resists bleed-through. 

TESA 60022 Spray Glue EXTRA STRONG is an extra strong, film-forming glue for permanently bonding materials such as fabric, plastic, cardboard, foam rubber, insulating materials, vinyl, leather, faux leather etc.. Spray Can 500ml.

Tensorgrip® L22 is a fine spray adhesive for the permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

Open Time Up to 30mins, clear.

3M DisplayMount Permanent Multi-Purpose Spray Adhesive is a multi-purpose adhesive specially designed for heavy-duty applications

For bonding most porous and non porous materials including many plastics, fabrics, metal foils, paper, board, carpeting and rubber with a permanent bond.

3M Hi-Strength 90 Spray Adhesive is an extremely versatile, fast-drying spray adhesive that bonds strongly to a wide range of materials. The spray formula is easy to dispense, offering a variable-width spray pattern, and applies directly onto surfaces and materials where needed.

Bonds laminate, wood, concrete, metal, plastic and more