Adhesives and Sealants

Manual Dispenser COX VBM 100 applicator to dispense two-component adhesives in 400 ml cartridges with 1:1 2:1 4:1 10:1 mix ratio with the conversion kit included in the package. 

Available in 7/10 working days from order date

TensorGrip® L17 is a high-performance contact adhesive. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.

Open time up to 40 mins, dries in 1-2 mins (dependant on temp & humidity). High Temp Resistance - 120°C. Clear.

IMO-MED Approved

TensorGrip® C101 Citrus Cleaner is a biodegradable, citrus solvent cleaner and adhesive remover. It can be used safely on most surfaces and substrates, including painted surfaces, glass, porcelain, and concrete, and is compatible with many plastics and vinyl.

Tensorgrip® F11 is a high-performance plasticiser-resistant adhesive, specially formulated to bond all commonly used substrates found within the foam and upholstery industry. The F11 will bond vinyl, rubber, leather and plastics, without causing delamination.

Open Time up to 15 mins, clear.

To be used with specific accessories

Tensorgrip® L22 is a fine spray adhesive for the permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

Open Time Up to 30mins, clear.

To be used with specific accessories

TensorGrip® L17 is a high-performance contact adhesive. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.

Open time up to 40 mins, dries in 1-2 mins (dependant on temp & humidity). Clear.

IMO-MED Approved

To be used with specific accessories

Tensorgrip® L22 is a fine spray adhesive for the permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

Open Time Up to 30mins, clear.

High-performance contact adhesive TensorGrip® L27, its resin formula creates a tough and resilient bond line between decorative surface materials and common wood substrates. Suitable for bonding HPL, GRP, aluminium, worktop edging, foam, fabric, carpet, cork & ridged plastics.

Open Time Up to 30 mins

To be used with specific accessories

TensorGrip® L27 is a high-performance contact adhesive, its resin formula creates a tough and resilient bond line between decorative surface materials and common wood substrates. Suitable for bonding HPL, GRP, aluminium, worktop edging, foam, fabric, carpet, cork & ridged plastics.

Open Time Up to 30 mins. clear.

Tensorgrip® L31 is suitable for bonding HPL and paperback veneers to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. It is designed for permanent bonding of materials where immediate bond strength and high heat resistance are required. The L31 can also be used for bonding sheet metals where surface preparation is very important; the surface must be degreased and lightly abraded with fine abrasive or non-woven material.

To be used with specific accessories

Tensorgrip® S105 Acetone Cleaner is a solvent cleaner that can be used safely on most surfaces and substrates including painted surfaces, glass, porcelain, concrete, and is compatible with many plastics and vinyls.

Tensorgrip® S105 is a hose flush and has been specifically designed for use with Tensorgrip® PU canister products as a Hose & Spray Gun Flushing System. It can be used safely on most canister spray equipment and is a strong solvent. 

TensorGrip® T18 is a mist spray adhesive designed for the purpose of bonging of fibrous matting. This hi-tac product with its immediate makes it the prefect product for temporary holds and fast application. TensorGrip® T18 is the perfect product for bond fibrous materials to metal and other materials with only a small amount of adhesive needed.

Open time 10 mins. Colour clear.